[zt] [HowTo] Testpoint SK65
七月 13th, 2006 by xLight
唉，服了，又被弄坏一个。
【原贴地址 】 http://forum.modopo.com/showthread.php?t=8438
此这里贴的是 使用 http://babelfish.altavista.com/ 将德文翻译成英文的
NOTE!!!
With this interference you lose your warranty!
This is (up to now) the only possibility, a SK65 with minimum firmware more largely 35 to patchen, a Fubu to select etc., without paying 20 euro for the SKEY.With this interference you lose your warranty!This is (up to now) the only possibility, a SK65 with minimum firmware more largely 35 to patchen, a Fubu to select etc., without paying 20 euro for the SKEY.
(original picture of phantom. Thank you.)
With this interference you lose your warranty!This is (up to now) the only possibility, a SK65 with minimum firmware more largely 35 to patchen, a Fubu to select etc., without paying 20 euro for the SKEY.(original picture of phantom. Thank you.)(original picture of phantom. Thank you.)For the selection of the BOOTP ASS ASS you need the PapuaUtils. Left to it in the forum are not published, but the program finds to her already somewhere. 
The selection of the BOOTP ASS ASS functions in such a way:
- Equipment with the Akku connect, + and - pole is sufficient (best by clamps)
- Test POINT with a resistance (16-50 ohms) as in the illustration manufacture
- To selection procedure for Hash and ESN in PapuaUtils with click on “DO job” in the rider “Flash” start and the red listener key immediately press
- after 1,5 - 2 sec. the resistance of the test POINT remove
PapuaUtils select Hash and ESN - in the rider “codes” the Button “Calculate SKey and BKey” press, in order to generate the BOOTP ASS ASS
- one config.ini for x65flasher and the VKD Loader for V_Klay produce
- Finished. Mobile phone cannot be assembled again, the test POINT any more is not needed.
The English version of the PapuaUtils has still some nose. Therefore it should be used only as collecting main, in order to find the correct Buttons in the most current Russian version.
